The G 165 & G166 have been designed to meet the ever increasing need to protect our environment. The Water Wash Spraybooth works on the principal of a curtain of continuous recycling water running down the rear face of the Spraybooth. A glaze spray is aimed towards this curtain, guided by a powerful extraction fan. The glaze is trapped by the water curtain whilst the air stream is pulled through the booth and into a washable Stainless Steel pre-filter, and finally into a washable filter bag. The excess glaze is washed into the tank and, depending on its type and colour, can be used at a later date. A fitted ball valve allows the water to be drained, and the contents of the tank removed, along with any other glaze materials. The booth is mounted on four castor wheels. The G 165 & the G166 are primarily designed to be used by the studio potter and within the educational setting for low volume production; consequently the booth does not require ducting to atmosphere making it ideally portable around the studio/ classroom.

Both the G165 & G166 Water Wash Spraybooths use a sophisticated baffle system to prevent water take through into the filter bag. They are designed to be used only with water-based materials; however, they can be adapted if required for solvents.

Please Note – under heavy usage we advise that this booth is extracted to atmosphere.

Both the G165 & G166 Water Wash Spraybooths use a sophisticated baffle system to prevent water take through into the filter bag. They are designed to be used only with water-based materials; however, they can be adapted if required for solvents.