Kilns & Furnaces Menu

© Copyright 2015 Kilns & Furnaces Limited
WordPress website by SO Marketing SO Marketing

Menu

Contact Us
Spares / Service

Turbo Gas – Front Loading Gas Fired Kilns

Turbo Gas – Front Loading Gas Fired Kilns

The turbo Gas range is the result of many years of continuous development providing kilns, which have the ultimate in temperature control systems to give excellent temperature distribution coupled with fuel economy. The linings have been selected to give an excellent life span under the most robust firing conditions whether it be oxidising or reducing atmospheres.

We also offer a design facility for requirements not satisfied by our standard range.

Front loading Gas fired kilns

Turbo Gas Kilns are heavy-duty kilns capable of firing stoneware and porcelain bodies under oxidising and reducing conditions. The linings of the standard kiln comprise of insulating firebrick to the hot face together with alternative versions available with low thermal fibre module linings coupled with an insulation firebrick hearth. The standard range has a maximum design temperature of 1350°C with a non-standard maximum design temperature of 1600°C available.

 

 

  • Setting volume capacities 100 litres to 1.0 cubic metres
  • Maximum design temperature - 1350°C
  • Hotface lining in 1450°C grade insulating refractory brickwork
  • Automatic temperature controlled reduction on/off if required
  • Nozzle mixing burners with silicon carbide combustion tubes, spark ignition and flame failure safety systems
  • Air/gas ratio automatically controlled
  • Fully compliant with both UK and EC gas regulations
  • TCS2 16 bit programme controller as standard
  • Kiln lining over-temperature protection circuit as standard
  • Supplied for use on either Natural gas or LPG
  • Minimum gas pressure required – 22 millibars
  • Electrical supply required – 32 amps 3 phase/neutral 400 volts
  • Class truck kiln design 400 litre capacity and above
  • Easi-load roll out hearth style 300 litre and above incorporating the kiln door
  • Semi automatic reduction system via independent ring main
  • Low thermal fibre module lining in lieu of standard lining
  • Atmosphere sampling instrument
  • Commissioning (highly recommended)
  • Build on site where access is limited
  • Full export services for overseas clients
  • Kiln furniture
  • Non standard sizes can be designed
Type Capacity Ware Setting Dimensions Overall Dimensions Number of Burners Burner Rating
Litres / Cu ft Width (mm/in) Depth (mm/in) Height (mm/in) Width (mm/in) Depth (mm/in) Height (mm/in) Therm
FTG.100 100/3.5 460 mm/18” 440 mm/17.5” 495 mm/19.5” 1000 mm/39.5” 1100 mm/43.5” 1630 mm/64" 1 2 Therm
FTG.200 200/6.89 530 mm/21” 530 mm/21” 695 mm/27” 1100 mm/43.5” 1140 mm/45” 1810 mm/71.25” 1 2 Therm
FTG.300 300/10.6 610 mm/24” 610 mm/24” 805 mm/32” 1100 mm/43.5” 1220 mm/48” 1925 mm/76” 1 4 therm
FTG.400 400/14.00 610 mm/24” 760 mm/30” 865 mm/34” 1940 mm/77” 1400 mm/55” 2080 mm/82” 2 2 Therm
FTG.500 500/18.00 610 mm/24” 760 mm/30” 1080 mm/42.5” 1940 mm /77” 1400 mm/55” 2240 mm/88” 2 2 Therm
FTG.750 750/27.00 910 mm/36” 780 mm/31” 1060 mm/42” 2510 mm/99” 1450 mm/57” 2220 mm/87.5” 2 4 therm
FTG.1000 1000/36.00 910 mm/36” 1040 mm/41” 1060 mm/42” 2510 mm/99” 2120 mm/84” 2220 mm/87.5” 2 4 therm
Type Shelves Batts Batt Dimensions Prop Sizes and Quantity Per Set
Per Set Width (mm/in) Depth (mm/in) Thickness (mm/in) 25mm (1") 38mm(1.5") 100mm (4”) 150 mm (6”) 200mm (8”)
FTG.100 4 4 430 mm 430 mm 25 mm 24 24 - - -
FTG.200 5 5 510 mm 510 mm 25 mm - 15 15 15 -
FTG.300 5 10 560 mm 280 mm 25 mm - 15 27 9 -
FTG.400 6 24 360 mm 290 mm 19 mm - 24 36 16 8
FTG.500 6 24 360 mm 290 mm 19 mm - 24 36 16 8
FTG.750 6 24 430 mm 375 mm 19 mm - 24 36 16 12
FTG.1000 6 36 430 mm 330 mm 19 mm - 30 48 30 12

This website uses Cookies.